"Extra Sensor" for all FloodStop Systems
If additional coverage (detection points) are desired for even quicker detection/prevention.
- Additional sensor(s) can be plugged into one another in a daisy-chain order (comes with 1 meter wire with connectors)
- Example: Additional Sensor allows one sensor to be placed inside an appliance's pan and the other sensor outside the pan
- Example: Additional Sensor(s) allow multiple appliances or fixtures to be monitored
- Multiple sensors can be strung together at a quantity of your choosing
- The 1 meter wire with connectors can be made longer by splicing in a similar gauge paired wire to the desired length
- Works with all FloodStop products
|
 |
"Controller to Valve Extension Wire" for all FloodStop Systems
For ease of locating “Controller” further away from “Valve” when desired.
- Use to mount the Controller more than 2.5 feet away from the Valve
- Needed for Stackable washer-dryer applications (one wire needed per valve)
- 9 feet long with mated connectors on each end to insure quick and custom connection
- Thin low-voltage white extension wire makes connection simple and virtually out of sight
- For even greater distance applications, use multiple wires to reach the desired length
- Works with all FloodStop products
|
 |
"Transformer Extension Wire" for all FloodStop Systems
For ease of installation if an electrical outlet is not close by.
- Use when the distance between 110V outlet and Controller is more than 6 feet
- 9 feet long with mated connectors on each end to insure quick and custom connection
- Thin low-voltage white extension wire makes connection simple and virtually out of sight
- For even greater distance applications, use multiple wires to reach the desired length
- Works with all FloodStop products
|
 |
Sales: 1-949-362-2959 