H2Orb for Toilet

Prevent Toilets from flooding your property and more:
Toilet overflows cause property damage and create opportunities for slip & fall injuries. The extent of damage can vary dramatically (from unsanitary cleanup and drying efforts, up to extensive repair and restoration of both structure and furnishings). People often flush too much toilet paper, hygiene products and even toys down the toilet causing overflows. Let the H2Orb safeguard your property and maintain a safe and sanitary bathroom environment.

Without H2Orb, Flooding Will Continue:
With H2Orb, Property Damage is Avoided:

How does H2Orb stop overflows?

The H2Orb’s “bowl sensor” detects a high water level caused by a blockage, and then automatically shuts off the water supply. The H2Orb contains the waste within the toilet bowl and avoids the cleanup and water damage when waste overflows all over the floor and beyond. No cleanup efforts are needed… simply plunge away the obstruction and resume normal operations.

Prevent Toilet Leaks (Optional):

Leaking toilets cause unnecessary water loss caused by a stuck/open-flapper, worn/warped leaking flapper, constant running fill-valve or a fractured toilet tank. This unnecessary water loss translates to higher water and sewer/septic bills and expenses.

How does H2Orb stop leaks?

The H2Orb’s "tank sensor" monitors water level changes within the tank. When a leak is detected, the water supply is automatically shut off. The valve within the "controller" will remain closed until a push of a button resumes the water supply.

How does H2Orb’s Leak Detection reduce Water/Sewer/Septic expenses?

Stuck/Open-Flapper events are regarded as a silent thief and vandal. These events are primarily responsible for unexpectedly high water/sewer bills and septic system overload. Example: A stuck/open-flapper condition wastes 200 gallons per hour. more info

H2Orb automatically shuts off the water supply to the toilet and sounds an alarm, leaving all other household fixtures and appliances operational. Easily installed in ten minutes. 1-Year Manufacturer’s Warranty.

H2Orb Components

  • Main Controller (at angle-stop valve)
  • Bowl Sensor (at rim of toilet bowl)
  • Tank Sensor (inside toilet tank)
How H2Orb Works:

  • For Overflows: The Bowl Sensor signals the Controller to shut off water supply
  • For Leaks: The Tank/Leak Sensor signals the Controller to shut off the water supply
  • Controller’s valve stays open until overflow or leak is detected
  • Controller’s valve then stays closed until problem is identified
  • Controller’s audible alarm and clear icons alert & identify the cause of the fault
  • Resume water supply by pushing Open Valve button

Product Literature

Media